The oil film bearing oil lubrication management and use requirements

A) oil, the oil film bearing lubrication management:
Data show that the main cause of mechanical failure or early wear, more than half of them are related to lubrication technology governance. Good lubrication management, prevent the bearing and gear friction in the moving parts, such as scratches or sintering, prevent and reduce the wear and tear, reduce the friction resistance, prevent equipment accidents, advance equipment production efficiency; To save energy, progress energy effective utilization, increase the economic benefit, is the main task of the lubrication management work. h t t p:/ /fagbearings.freeblog.biz/2014/04/08/sliding-bearing-in-the-maintenance-problems-should-be-paid-attention-to/
1. The lubrication management is a professional and technical management, staff should set full-time lubrication technology governance, formulate lubricating system of governance, lubrication technology knowledge training.
2. Under the condition of reasonable fuel tank capacity, maintain reasonable tank oil level, often to fill lube oil tank, the tank inside remain the reasonable running oil level, oil to oil degassing, precipitation machine noise, separation of water and reduce the oil temperature in the cabinet are favorable.
3. The timing, positioning in the operation of the extract oil, from the oil smell, chromaticity, viscosity, water content, water change performance, the kind and content of pollutants, such as antifoaming performance testing laboratory. In lubricating points out of more than 0.1% of water content in oil, mechanical wear increase sharply; More than 0.5% of the lubrication condition will be very dangerous. To make a good record of detection.
4. The analysis and comparison testing record at a time, to guess the bad lubrication condition forecast, work out improvement or measures are avoided. On the system of the oil level, oil, oil temperature, oil pressure alarm and interlock control to safe and reliable, du lubrication accidents.
5. To prevent mixing oil and control the pollution of oil:
(1) the product purchase, and waste oil into the library, storage, processing, should have a strict management system, according to different varieties, grades, respectively, have apparent sign or logo is easy to distinguish, indicate the name, number, date, etc. It is forbidden to stored to prevent wrong with mix oil accident.
(2) stored and stored, must strictly to ensure a clean container and closed, prevent dust, impurities, invaded into the rain. Should be in the dark, a cool wind blowing, leaves the fire channel storage in the warehouse. Temporary in open air, should keep lid slightly tilted state position, to prevent invasion into the rain. Oil do not promote oxidation reaction, such as copper lead metal contact.
(3) the lubricating oil main projects: acceptance of the reinspection viscosity, viscosity index, water content, emulsification, extreme pressure resistance. Cleanliness requirements of mechanical impurities in 0.01%, no traces of water and sediment, etc.
(4) at the top of the tank manhole cover should cover tightly, do not open. Set air filter filtration precision in more than 100 mesh, regular check clearing, a drain valve timing emissions at the bottom of the tank. The petrol tank fill lube oil application pipeline pump, and furnish the appropriate filtration precision filter. Precipitation sludge tank should be cleaned regularly, do not allow to wipe the tank with fabric surface.